Archive for the 'Quilling' Category

Travels

At Mel’s request, I’m posting the finished product here that I blogged about last time with my Wicker Basket Tutorial.  It was a card for my grandparent’s sixtieth wedding anniversary! I enjoyed our visit to celebrate their anniversary so much and I took lots of pictures! SO, I have decided that I’m going to make an album for them and give it to them at Christmas.  I don’t want to post all the LOs here (I hope you don’t mind), but you can see my progress thus far here. I’ve been pretty busy with that particular project and all my preparation for work in the fall, so I haven’t had a whole lot of time to blog (or visit).  I hope to remedy the latter soon!  Thanks for reading/looking!

Advertisements

“Wicker” paper basket tutorial

So I’m working on a rather largish project at the moment, but I thought I’d give you a sneak peek by way of a tutorial.  One component of this project is a “wicker basket” made out of paper strips.  I got my inspiration from a quilling book, but decided to take it a step further to see if I could really make it look like wicker.  You might notice that the original number of vertical strips was reduced at the end, but that’s not that important—I think you’ll get the idea.

I started by cutting 6 5mm wide by 11.5cm long strips (vertical strips) out of white copy paper. Use a paper cutter.

Then, using a hand shredder (or you can buy white quilling strips), I made 25 3 mm wide by 7.2 cm long strips (these will be the horizontal “weaving” strips).

I placed all the strips on a piece of paper, and then rolled a brayer over them covered in distress ink–first with Antique Linen, then with Scattered Straw.  Allow them to dry.  If you use copy paper or some other lightweight paper, the paper will become quite wet, but you get good color saturation.  I didn’t want uniform color as I was going for a more “natural” look.

I arranged the vertical strips on a piece of paper, leaving no more than 1mm between them.  Glue the top edge of the strips down lightly (be prepared to trim this part off later as you’ll probably pull up some paper with the glue). Weave in the horizontal strips, alternatively starting over and under with each row. This will take some patience. 🙂 Don’t be afraid to do a loose weave and then adjust all the strips at the end. Once you have all the strips where you want them, strategically glue the strips on the perimeter so it will keep the weave in place. Reserve one or two of the horizontal strips.

Cut a trapezoidal shape (inverted) out of chipboard or other heavyweight paper (this will be dependent on the size basket you want, but mine was 3.8 cm at the top edge, 3cm at the bottom, with roughly a 4.8 cm vertical median)

Flip the weave over (inked side down) and glue down the chipboard in the center, making sure you have enough weave on all sides to fold over. I recommend using a smooth glue so that you can cover the entire surface of the chipboard .

Fold the strips up over the chipboard, trimming as necessary.  Glue and secure with paper strips. Allow to dry.

When dry, flip the basket face up and make a spiral quilled strip with one of the reserve horizontal strips. Glue this to the top edge of the basket (not pictured–yet).

Using a foam brush, coat the entire basket with a layer of Mod-Podge. Use several layers and allow to dry in order to give your “wicker” a lacquered look. 🙂

Voila! You know have a paper “wicker” basket ready for use in a project (coming soon!)

The basket here has not been “lacquered” yet and does not have the ornamental spiral edge. You’ll see that when I’m finished with the entire project. 🙂

Summer’s Here!

And with it…my return to crafting! 🙂

I’ve been getting back into quilling and will be excited to share my projects here. I also plan to keep posting at Going Green Crafters and Artists (I’ve just put up a post on using die cut negatives).  Here are a few recent Thank You cards I’ve made for my annual music charity walk.

Made from scrap stash except for scalloped green cardstock (Paper Source). PP is Basic Grey Wisteria Collection.

PP is from BasicGrey’s June Bug collection, mounted on Bazzil “Dotted Swiss” (Phoenix).

Die cut scraps on Bazzil Dotted Swiss (White)

It doesn’t show up in the photo, but I applied Pearl Glimmer Mist to the flowers on the left and right (not the center–I forgot, lol).  The scallop squares are a die cut (Provo/Cuttlebug), and I used ribbon from my stash. Cardstock is Bazzil Dotted Swiss (White).

THANKS FOR LOOKING!

Violet Bouquet

This is my very first quilling project, now completed! It is based on Claire Choi‘s “Violet Bouquet” in her The Art of Paper Quilling (p. 38). I changed some of the colors around (acc. to what I had available) and left out a few things I didn’t like.  I’m pretty happy with it…I need to work on my bunny ears and my arrowheads because the bow didn’t come out right. Mounted on khaki cardstock.

CIMG8538CIMG8541

Quilling Project A: In Progress

Ok, so here’s a sneak peak at my latest project.  I have to say that quilling has become a good form of meditation for me…and it requires patience, so it is good practice for me in that area!!

CIMG8522CIMG8523

CIMG8526


Follow Me on Twitter!

Favorite me on Technorati!

Add to Technorati Favorites

e-mail me

craftlyra at gmail dot com (no "y" after craft!)

Blog Stats

  • 27,531 hits

Blog Posts

October 2017
M T W T F S S
« Jul    
 1
2345678
9101112131415
16171819202122
23242526272829
3031